| Features |
|---|
| • Complies with IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX and 100Base-FX standards |
| • Fiber connectivity up to 2km for multimode fiber, 60km for single-mode fiber |
| • Optional SC, FC, ST, LC or Bi-directional SC (single mode only) fiber connectors |
| • One auto-MDIX RJ-45 connector interface |
| • Full-Duplex, Half-Duplex, or Auto-Negotiation |
| • Supports packet length up to 1600 bytes |
| • 8 diagnostic LEDs (100Mbps, fiber full duplex, UTP full duplex, fiber link, UTP link, fiber signal detect, fiber far-end-fault detect and power) |
| • Provides fault propagation function for easy cable fault detection |
| Description |
|---|
| The CS-110 series provides you with various optional connectors for your fiber optic cable and RJ-45 ports (straight through and crossover) for your 10/100Base-TX cable connection. When auto-negotiation is selected, these units will automatically tailor themselves to convert both half-duplex and full-duplex signals, depending on your specific network needs. You may also set the unit to convert signals in full-duplex only or half-duplex only. The Fast Fiber Converters give you the freedom to extend your 10/100Mbps cabling distance a lot. Eight LED indicators signal the detailed operating status of the converter for easier fault identification. |
| Specifications | |
|---|---|
|
• Compatibility Standards Protocol |
IEEE 802.3 10Base-T, 802.3u 100Base-TX and 100Base-FX CSMA/CD |
|
• Physical Characteristics Interface Optical wavelength Maximum Segment Length Operating Temperature Operating Humidity External Power Supply |
RJ-45 connector, using UTP 100-ohm Cat. 3, 4 or 5 cable; SC, FC, ST, LC or Bi-directional SC (single mode only) fiber connectors 850nm (multimode only), 1310 nm or 1550nm (single-mode only) UTP cable (100 Base-TX): 100 meters Fiber optic cable: 2km (multimode) or up to 20~60km (single-mode) 0°C to 70°C 10% to 90% (Non-condensing) Input rating: 110 or 220 VAC, 50-60 Hz Output rating: 5 VDC, 1A |