SENAO NL-2611CB3 PLUS (Deluxe) - High-Power Wireless Multi-Client Bridge/ AP
   - Long Operating Range
   - Easy and Quick Connect your Ethernet Device to Wireless
   - Hide SSID to secure your Network (AP Mode)
   - No Driver needed (Plug and Play)
   - Flexible Access Point locations and cost savings (Power-over-Ethernet)
Features Benefit
Up to 23dBm(200mW) RF Output Power Up to 9 times coverage of Regular Multi-Client Bridge
11Mbps IEEE 802.11b Compliant Fully Interoperable with IEEE 802.11b Compliant
Point-to-point, Point-to-multipoint Wireless Connectivity Let users transfer data between two buildings or multiple buildings
Plug and Play No driver needed, easy and quick to connect your Ethernet device to Wireless
Power-over-Ethernet Flexible Access Point locations and cost savings
64 /128-bit WEP data encryption Powerful data security
Hide SSID (AP Mode) Avoids unallowable users sharing bandwidth, increases efficiency of the network
DHCP Client Simplifies network administration
Web-based configuration Helps administrators to remotely configure or manage the Multi-Client Bridge with web browser
MAC address filtering (AP Mode) Ensures secure network connection
Seamless Roaming Allows users to travel between APs without losing their network connection
Specifications :
GENERAL
Data Transfer Rate 11, 5.5, 2 and 1 Mbps, Auto Fall-Back
Frequency Band 2.400~2.484 GHz
Range (open environment) 11 Mbps -300m/450m (23 dBm output power)
5.5 Mbps -400m/600m (23 dBm output power)
2 Mbps -500m/750m ( 23 dBm output power)
1 Mbps -800m/1200m (23 dBm output power)
Radio type Direct Sequence Spread Spectrum (DSSS)
Operation Channels 11 for North America, 14 for Japan,13 for Europe, 2 for Spain, 4 for France
Modulation 11 Mbps / 5.5 Mbps CCK
2 Mbps: DQPSK
1 Mbps: DBPSK
RF Connector TNC Female-Reverse
RF Output Power 23dBm(200mW)-FCC
20dBm(100mW)-CE
WEP data encryption 64/128-bit
Compatibility IEEE 802.11b compliant
Regulation Certifications FCC Part 15/UL, ETSI 300/328/CE
Power Supply 12V DC/ 1A
Network
Topology Point-to-Point/ Point-to-Multipoint/ Infrastructure
Interface One 10Base-T RJ-45 LAN Port
Firmware Upgrade Upgrade firmware via TFTP
Security MAC address filtering (AP Mode)
WEP encryption (64/128 bit)
Hide SSID in beacons, stations can not use "any" SSID (AP Mode)
IP Auto-configuration DHCP client
Management Web-based configuration
Environment
Temperature Range 0 to 55°C (32°F to 131°F) - Operating
-20°C to 80°C(-4°F to 176°F) - Storage
Humidity (non-condensing) 5%~95% Typical
Physical Specifications
Dimensions 125(L)mm * 108(W)mm * 31(H)mm
Weight 350 g
* Specification is subject to change without notice