Repotec RP-1705K/1708K - 5-P/8-P 10/100Mbps N-Way Switch
   The device provide a network with five (5) or eight (8) new and independent bandwidths. speed N-Way ports with TP . Every port provides a built-in Auto-Negotiation function that automatically senses for the widest possible bandwidth (10Mbps - 200Mbps), then instantly sets the port to operate at that speed. In addition, each port provides its own independent bandwidth. This means users can instantly add five (5)/ eight (8) new bandwidths by simply attaching network cabling. This combination provides networks with the utmost in hardware flexibility. The device is a plug-&-play Switch, no confusing configuration is needed. The Switch offers a user friendly design with all status LEDs conveniently located on the front panel, and TP ports neatly placed along the back panel. To instantly add five (5) /eight (8) new bandwidths to, or to upgrade the performance of any network.
 • Five (5)/eight (8) independent bandwidths with 10Mbps - 200Mbps capability.
 • Five (5)/ eight (8) Switched ports with Auto-Negotiation function.
 • Full wire speed "Store-and-Forward" technology instantly eliminates bad packets.
 • Filtering/Forwarding rate: 148,800 packets/sec. per port max.
 • IEEE 802.3x Flow-Control support for Full-Duplex operation.
 • Back-Pressure support for Half-Duplex operation.Palm sized with external power adapter.
 • IEEE 802.3u and 802.3 standards compliant.
 • Plug-&-Play with easy to read diagnostic LEDs.
 • Five (5)/ eight (8) ports Auto-MDIX detects and corrects crossover cables.
 Standards  100Base-TX, IEEE 802.3u
 10Base-T, IEEE 802.3
 Ports  Five (5) 100BASE-TX/10BASE-T
 Eight (8) 100BASE-TX/10BASE-T
 Media Suport  100Base-TX Category5 TP
 10Base-T Category 3, 4 or 5 TP
 Bandwidth  100Base-TX/10Base-T - 200/100/10Mbps, via Auto-Negociation
 Forwarding/Filtering Rate  148800 packets/second per port @ 100Mbps, max.
 14880 packets/second per port @ 10Mbps, max.
 Duplex Modes  All ports support Half-Duplex and Full-Duplex operation
 Auto-MDIX  All ports support Auto-MDIX which can detect and corrects crossover cables
 LED indicators  One (1) for Power On/Off
 One (1) per port for Link/Activity
 Power Supply  External Power Adapter
 Environment  Operating Temperature: 0° ~ 45° C (32° ~ 113°F)
 Storage Temperature: -20° ~ 70° C (-4° ~ 158°F)
 Humidity: 10% ~ 90% Non -Condensing
 Certifications  FCC Class B and CE Mark
* Specification is subject to change without notice