Planet WAP-4035 - 54Mbps Wireless Access Point with 5-Port Switch

   The WAP-4035 supports both IEEE 802.11b and IEEE 802.11g standards. You can use it to connect to an existing WLAN, or to build up a new wireless LAN. Except essential AP mode, the WAP-4035 provides Repeater, Bridge, WDS, and Client modes to accommodate all kinds of network topology. High data rate (up to 54Mbps) performing allows faster communication between LAN and WLAN. Built-in 5-Port switch saves your extra cost when connecting multiple wired PCs. Maximize network efficiency via using the WAP-4035 while minimizing your network investment and maintenance costs.

   The WAP-4035 supports WEP, WPA, WPA2 and MAC address filter function to consolidate the wireless network security; you can prevent unauthorized stations from those who access accessing your wireless network. Compatible with 802.1x authentication, with its built-in RADIUS Server, users can setup a RADIUS Server by enable/disable, without a lot of complex installation.

   With the user-friendly management interface and versatile features, the WAP-4035 is the best choice to integrate your wireless and wired network seamlessly
Product Application
  SOHO and SMB users
The WAP-4035 has built-in a 5-Port switch. User can connect up to 5 wired PCs to the WAP-4035 directly without additional switch. For setup a wireless network with wired PCs, it provides the most convenience to the new wireless users.
  Enterprise or Campus Users
In an enterprise or somewhere else, some mobile users may need a continuous network connection; by installing the WAP-4035, mobile users can be always surf on the internet by installing a wireless card in their notebook or PDA. The roaming capacity allows users to connect to the network to transparently roam from one access point to another.
  Wireless ISP
The first mile solution is simple with PLANET's wireless devices. Being wireless; meanwhile, provided up to 54Mbps bandwidth is also a essential function. By installing the WAP-4035 equipped with omni-directional antenna in the user's neighborhood, all users around the access point can be easily connect to Internet through the access point if they also install a wireless PCI card or a WAP-4035 in Client mode.
  LAN to LAN or LAN to Multi-LAN
Wiring inside your own building perhaps is an easy job, however, it is hard if network cabling needs to go through some public areas or difficult wiring environments. The WAP-4035 can work in a bridge or repeater mode to provide a robust solution for connecting two or more buildings together.
Key Features
 • Compliant with the IEEE 802.11g/802.11b (DSSS) 2.4GHz specification
 • High data rate up to 54Mbps network speed, auto rate fallback
 • Built-in 5-Port switch, support Auto-MDI/MDI-X function
 • Seamlessly integrates wireless and wired networks
 • Supports WEP/WPA/WPA2 encryption
 • Supports AP/ AP Client/ Bridge/ Repeater and WDS (Wireless Distributed System) mode
 • Built-in RADIUS Server
 • Supports MAC Address Filter
 • Provides a reverse-polarity SMA connector for external antenna connection
 • Built-in DHCP server
 • Web-based configuration
 Standard  IEEE 802.11g/802.11b (Wireless)
 IEEE 802.3/802.3u (Wired)
 Transfer Rate  802.11g: 54/48/36/24/18/12/9/6Mbps
 802.11b: 11/5.5/2/1Mbps
 Modulation  OFDM@54Mbps, CCK@11/5.5Mbps, DQPSK@2Mbps and DBPSK@1Mbps
 Radio Technology  Direct Sequence Spread Spectrum (DSSS)
 Antenna  Detachable dipole antenna
 Operating modes  Access Point
 Station - Ad-Hoc
 Station - Infrastructure
 Bridge - Point to Point
 Bridge - Point to Multi-Point
 Bridge - WDS
 Universal Repeater
 Transmit Power  18dBm (Maximum)
 LAN Interface  5-port RJ-45, Auto-MDI/MDI-X
 Cabling  Category 5/5e or above, 4-pair
 LED Indicators  PWR, WLAN, 5 x 10/100M, 5 x LNK/ACT
 Power  12V DC, 1A
 Temperature  0 ~ 55C (Operating)
 Humidity  10 ~ 90%, non-condensing (Operating)
 Dimension  190 x 98 x 35 (mm)
 Weight  300g
 Emission  FCC class B, CE-mark
* Specification is subject to change without notice